How do I perform a key cycle?
My Lincoln Vehicle>SYNC>Troubleshooting>How do I perform a key cycle?

How do I perform a key cycle on my Lincoln?

A key cycle is an easy way to refresh the vehicle's SYNC®* system by turning the vehicle off and back on. A key cycle can be useful when the screen is frozen.

  1. Turn the vehicle completely off. The vehicle engine should not be running, and the vehicle should not be in accessory mode. 

    Note: Many newer vehicles will keep the radio on, even when the car is turned off until a door is opened.

  2. Open the driver’s door and lock the door.

    Note: If your vehicle is equipped with an Intelligent Access System with a push-button start, exit the vehicle with your keys before locking the door.

  3. Close the driver’s door.  
  4. Wait two minutes and ensure the radio display turns off completely.
  5. Restart the vehicle. 

Additional Information

How do I check for SYNC updates?
How do I perform a master/factory reset?

*Don’t drive while distracted. Use voice-operated systems when possible; don’t use handheld devices while driving. Some features may be locked out while the vehicle is in gear. Not all features are compatible with all phones.